Skip to main content

Injection Accessories

"F" Assembly

The “F” assembly is to be used with a two-component pumping system for injecting acrylic grouts. The “F” assembly contains a stainless-steel assembly with quick connects and two way shut-off valves.

Button Head Coupler

Button Head Coupler

The Button Head Coupler attaches to EZ-3P or EZ-4 injectors to allow grout to flow through. *Injector not included.

Coupler

Coupler

The Coupler connects to the grease fitting which allows grout to flow through. It attaches to EZ-1, Mechanical (1/2" & 5/8") or 3/8" Bang-In injectors. *Injector not included.

Epoxy Surface Ports and Hose

Epoxy Surface Ports and Hose

The Epoxy Surface Ports are used with the AV-502 Injectable Bonding Epoxy series. Surface ports are commonly used for epoxy injection at relatively low injection pressures. Available in round or corner ports.

Injection Needles

Injection Needles

Injection Needles are used for penetrating leaking pipe-to-manhole connections and for manhole chimney grouting and are suitable for injecting grout behind cured Expanded Gasket Placement Technique (EGP) application.  The stainless-steel 1/4" needles are available in lengths of 10", 12", 15", 18", 24", and 36".

Moisture-Resistant Hose

Moisture-Resistant Hose

The Moisture-Resistant Hose is recommended to prevent resin from “setting up” inside lines. Available in 25' and 50' lengths. 

Resin Injection Gun

Resin Injection Gun

The Resin Injection Gun is used with single-component pumping systems. The stainless-steel gauge attached to the gun reads pressures while injecting into the crack. The tip is fitted with a grease fitting coupler.

Wall Spear Assembly

Wall Spear Assembly

The Wall Spear Assembly is a reusable carbon steel or stainless-steel accessory used in conjunction with the “F” Assembly as a resin injector for acrylics.