Articles tagged with: Avanti

Jun03

How to Choose a Grout for Sealing Mainlines and Laterals

- February 25, 2013 - Views 3562

Below are some questions to consider when choosing a grout for sealing mainlines and laterals--before, after, or independent of lining:

  1. Cost: Cost should only be one factor. What is more important is that you are using the appropriate product for the job and the grout is applied correctly--in accordance with the 2012 NASSCO recommendation is a good start.
  2. Cost vs. Cure Time: Grouts have different cure times. Be sure to check tech data sheets to determine how much control over cure time you will have in the field. Better yet, you can do a more thorough investigation by performing your own tests. The more catalyst you need to reach the desired goal, the more money you'll spend on product.
Jun03

Joint Failure Not Always Obvious--Test Every Joint

- February 25, 2013 - Views 3328

I visited a job site a few weeks ago and talked with the grouting operator. I found three things very cool:

  1. It was nice to visit a grout truck that was kept clean and orderly. This was a municipality that only has one crew responsible for each grout truck, so they treat it like their own.
  2. They air tested every joint. There is no point in grouting only the visible leaking joints and ignoring the ones that are not noticeable. The joints must pass an air test or should otherwise be grouted. If not, once you grout the leaking joints, the groundwater simply migrates to the next joint and enters there.
May31

Miami-Dade Attacks Infiltration and Scores Major Win for the Community

- February 25, 2013 - Views 3304

I recently visited with Rod Lovett and Juan Bedoya with the Miami-Dade Water and Sewer Department. It was great to see them and meet some of their crew. Last year alone, Miami-Dade invested in nine new grout trucks. After 25+ years of grouting, it is encouraging to see one of the largest municipalities in the country so committed to stopping water infiltration. 

May17

Lift Sunken Concrete Slabs with a Structural Foam

Britt Babcock - February 25, 2013 - Views 7640

Many facility managers are unaware of the liabilities associated with trip hazards in public walkways, the excess wear and tear on forklifts from uneven industrial floors, or that SLAB LIFTING is possible with minimal interruption. Traditional mud jacking methods require drilling large holes in the slab to inject a cement slurry with a long cure time adding excess weight to unstable soils. And "jacking" does not address the cause of soil failure. Avanti's AV-600 SureLift™ reduces groundwater intrusion and erosion factors, fills voids, and provides a fast cure within 1/10" of desired grade.

Apr15

Crack Injection, Slab Lifting and Curtain Grouting…Oh My!

Jessica Williams - April 15, 2013 - Views 3397

Crack Injection, Slab Lifting and Curtain Grouting…Oh My!

As Marketing Coordinator, I’m typically not in front of the product on a daily basis. But I am the one “in charge” when it comes to putting the pieces of our Urethane Injection School together, by transforming into event coordinator, caterer, and photographer.  While keeping the event organized and flowing, I get to experience the same value that our Grout School attendees do. Since I’m not out in the field, having the chance to watch how the products work and interact, and seeing how issues can arise at the drop of a hat is intriguing to me.

Dec14

Chemical Grouting Tips

- September 10, 2012 - Views 3743

Never lose man hours over the simple stuff!

  1. Have extra Zerk® couplers onsite in case you gum one up.
  2. Line your grout buckets with thick mil garbage bags. This makes clean up easy, saves the pail, and prevents the grout from being contaminated.
  3. Get a socket wrench to install packers. It really speeds up their installation.
Nov21

Was it Teaching or Adding Depth to Different Perspectives?

- September 10, 2012 - Views 4932

Was it Teaching or Adding Depth to Different Perspectives?

The two-day Urethane Injection School November 13-14 was a rich learning experience for everyone including Avanti team members. The talent pool in the audience ranged from owners of multi-disciplined construction companies to engineers from Mexico to presidents seeking to expand their services. So how do you advance the individual skill-sets within a group so widely diversified? Answer: See, Touch, Experience.

Sep10

Creativity—Sometimes the Most Important Ingredient

- September 10, 2012 - Views 10064

Creativity—Sometimes the Most Important Ingredient

PLACE: Tacoma, Washington
PROPERTY: Oil Recycling Station
PROBLEM: Retaining wall with 10 access holes and two 8" HDPE pipe penetrations less than 4' from railroad tracks. 

The engineering drawing called for "Flexible Material" surrounding these pipe penetrations, but provided no recommendation or specification. Avanti Field Services visited the site and noted the high probability of pipe deflection and movement as tanker cars went over them. This conundrum required a creative solution.

<<  1 2 3 4 [56  >>