Avanti International
822 Bay Star Blvd.
Webster, TX 77598
800-877-2570
281-486-5600

 
  
 
   

 

Scotch-Seal Chemical Grout 5610 is applicable with the type of chemical and biological effluents found in typical industrial and sanitary wastewater.

 
 

 

Appearance:
Solids Content (ASTM D-1010):
Viscosity (ASTM D-1638):
Flash Point (ASTM D-93):
Corrosiveness:
  Blue-green
  77 - 83%
  600 - 1200 cps @ 70 ° F
  16 ° F (-9 ° C)
  Non-corrosive
 
 
 
Tensile Strength (ASTM D-1564):
Elongation (ASTM D-1564):
Shrinkage (wet):
Average:
Dry:
Toxicity:
  20 - 30 psi
  150 - 200%
  0% linear shrinkage
  8% linear shrinkage
  25% linear shrinkage
  Nontoxic in cured form
 
 

 

Store in a cool, dry place where temperatures do not exceed 80°F (27°C). Keep away from all sources of ignition. Keep container closed when not in use.
Properly stored in original unopened containers, the useful life is one year. Once the container has been opened, the useful lift is greatly reduced. Opened container can cure or gel prematurely if overexposed to moisture. Therefore, use as soon as possible; do not reuse.
 
 

 

(Requires Acrobat Reader )  
 

 

(Requires Acrobat Reader )  
 

 

This product contains Toluene Diisocyanate (TDI) and Acetone and should be used only in well ventilated areas in order to keep the vapor concentration low. Eye contact and repeated skin contact should be avoided. Normal protective clothing such as gloves and goggles are recommended. A self-contained breathing apparatus should be worn in confined spaces where there is little ventilation and vapors are likely to be high.  
 

 

Eyes: Immediately flush eyes with water for 15 minutes. Get immediate medical attention.

Skin: Wash affected area with soap and water. Remove contaminated clothing.

Inhalation: Remove to fresh air. If breathing is difficult, get medical attention.

Ingestion: Drink 2 glasses of water. Call a physician

Note: Never give anything by mouth to an unconscious or convulsing person.
 
 

 

Recommendations for use of this product are based upon tests believed to be reliable. Since field conditions vary widely, the user must determine the suitability of the product for his particular use. Avanti International warrants that this product conforms to the chemical description on the label. Avanti International makes no expressed or implied warranty. In no case shall Avanti International be liable for consequential, special, or indirect damages resulting from the use or handling of this product.
 
 
 

     
  AV-254 Gelseal  
  AV-350 Multi Gel  
  3M Scotch-Seal 5610