| |
 |
|
 |
|
Non-flammable, rapid curing, easily pumped resin usually injected into 1/16" to 1/4" cracks.
|
|
| |
 |
|
Appearance:
Solids Content (ASTM D-1259):
Viscosity (ASTM D-4016):
Flash Point (ASTM D-93):
Corrosiveness:
Reaction Time: |
Pale yellow liquid
85%
200 cps @ 60 ° F
>212°F (100°C)
Noncorrosive
40 seconds @ 70°F |
|
|
| |
 |
|
Tensile Strength (ASTM D-3574 Test E):
Elongation (ASTM D- 3574 Test E):
Shrinkage:
Bonding Strength:
Toxicity:
|
150 psi
300-400%
<2% after initial cure
250-300 psi
Nontoxic |
|
|
| |
 |
|
AV-315 Micro Foam is sensitive to moisture and moderately sensitive to high storage temperatures. Store in a dry area between 40°F and 80°F.
AV-315 Micro Foam should be properly removed from all application equipment due to the high risk of moisture contamination. Immediately after use, hoses and pumps can be cleaned with AV-208 Acetone or AV-284 Pump Wash. This product is packaged under dry nitrogen to extend shelf life. |
|
| |
 |
|
 |
(Requires Acrobat Reader ) |
|
| |
 |
|
Product contains Toluene Diisocyanate (TDI). Vapors may cause respiratory irritation and sensitization. Take precautions to avoid breathing of fumes and vapors. Operators should be equipped with protective clothing including rubber gloves and face shield. Ventilation should be used in confined spaces.
|
|
| |
 |
|
Immediately flush eyes with water for 15 minutes. Get immediate medical attention.
Wash affected area with soap and water. Remove contaminated clothing.
Remove to fresh air. If breathing is difficult, get medical attention.
Drink 2 glasses of water. Call a physician.
Never give anything by mouth to an unconscious or convulsing person.
|
|
| |
 |
|
The data, information and statements contained herein are believed to be reliable, but are not construed as a warranty or representation for which Avanti International assumes any legal responsibility. Since field conditions vary widely, users must undertake sufficient verification and testing to determine the suitability of any product or process mentioned in this or any other written material from Avanti for their own particular use. NO WARRANTY OF SUITABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS MADE. In no case shall Avanti International be liable for consequential, special, or indirect damages resulting from the use or handling of this product.
|
|
| |
| |
