| |
 |
|
 |
|
Durable and versatile elastic foam or gel. Excellent for heavy or light flow conditions, as well as under water. Nonflammable. Cartridges available. |
|
| |
 |
|
Appearance:
Viscosity:
Flash Point:
Specific Gravity:
Corrosiveness: |
Dark brown liquid
2500 cps @ 30°C (77°F)
200°F (Pensky-Martins)
1.15 (9.53 Ibs./gallon)
Non-corrosive |
ASTM D-1638
ASTM D-93
ASTM D-1638 |
|
|
| |
 |
|
1:1 Water/Grout Ratio
Tensile Strength:
Elongation:
Tear Strength:
Density or Specific Gravity: |
20 PSI (1.406 kg/cm2)
190%
4.9 Ibs./in. (0.875 kg/cm2)
0.18 |
ASTM D-3574
ASTM D-3574
ASTM D-3574 |
|
|
| |
 |
|
Ratio Range
Water:AV-202
1:1 to 5:1
6:1 to 10:1
11:1 to 15:1
16:1 to 49:1
50:1 to 100:1
|
General Properties
Foam
Expansive gel
Soft gel
Very weak gel
Emulsion |
|
|
|
| |
 |
|
Ratio Range
Water:AV-202
1:1
2:1
4:1
6:1
8:1
|
Foam Time
in Minutes @ 72°F
1:50
2:50
4:25
8:00
11:00
|
|
|
|
| |
 |
|
| Chemical % Water |
Time (Weeks) |
Visual Appearance |
| Hydrochloric 2% |
26 |
Moderate Darkening
Slight Fragmentation |
| Acetic 2% |
26 |
No Change |
| Sulfuric 2% |
26 |
Moderate Darkening
Intact |
| Potassium Hydroxide 1% |
26 |
Moderate Darkening
25% Dissolved |
| Sodium Chloride (salt water) |
26 |
No Change |
| Ammonium Sulfate 2% (salt) |
26 |
No Change |
| Potassium Chlorate 5% (salt) |
26 |
No Change |
| Isopropanol 100% |
26 |
No Change |
| Heptane 100% |
26 |
No Change |
| Carbon Tetrachloride 100% |
26 |
Slight Darkening |
| Methyl Ethyl Ketone 100% |
26 |
Swelled 20-30% |
| Toluene 100% |
26 |
No Change |
Hydrogen Sulfide Gas
100%
Wet Condition |
9 |
No Change |
Hydrogen Sulfide Gas
80%
Wet Condition |
10 |
No Change |
|
|
| |
 |
|
AV-202 Multigrout is sensitive to moisture and moderately sensitive to high storage temperatures. Store in a dry area between 40°F and 80°F.
AV-202 Multigrout should be properly removed from all application equipment due to the high risk of moisture contamination. Immediately after use, hoses and pumps can be cleaned with AV-208 Acetone or AV-284 Pump Wash. This product is packaged under dry nitrogen to extend shelf life. |
|
| |
 |
| |
 |
(Requires Acrobat Reader ) |
|
| |
 |
|
|
(Requires Acrobat Reader ) |
|
| |
 |
|
Product contains Toluene Diisocyanate. Vapors may cause respiratory irritation and sensitization. Take precautions to avoid breathing of fumes and vapors. Operators should be equipped with protective clothing including rubber gloves and face shield. Ventilation should be used in confined spaces. |
|
| |
 |
|
Eyes: Immediately flush eyes with water for 15 minutes. Get immediate medical attention.
Skin: Wash affected area with soap and water. Remove contaminated clothing.
Inhalation: Remove to fresh air. If breathing is difficult, get medical attention.
Ingestion: Drink 2 glasses of water. Call a physician.
Note: Never give anything by mouth to an unconscious or convulsing person.
|
|
| |
 |
|
The data, information and statements contained herein are believed to be reliable, but are not construed as a warranty or representation for which Avanti International assumes any legal responsibility. Since field conditions vary widely, users must undertake sufficient verification and testing to determine the suitability of any product or process mentioned in this or any other written material from Avanti for their own particular use. NO WARRANTY OF SUITABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS MADE. In no case shall Avanti International be liable for consequential, special, or indirect damages resulting from the use or handling of this product.
|
|
| |
| |
