| |
 |
|
 |
|
Only Sodium Persulfate may be used with AV-118.
|
|
| |
 |
|
Mixing instructions when using AV-118 Duriflex
|
|
| |
 |
|
Dry solid sodium persulfate may be stored in the shipping container as received. Containers should be stored in a cool dry area. AV-103 Catalyst SP must be kept dry (out of high humidity) and stored as a combustible material.
Clean plastic or stainless steel scoops are suitable for removal from the shipping container. Metals other than stainless steel may cause decomposition of persulfate solutions; use care so that contaminants are not introduced.
Sodium Persulfate is a strong oxidizing agent and strongly exothermic. It should not be mixed with reducing agents or easily oxidizable organic compounds.
|
|
| |
 |
|
 |
(Requires Acrobat Reader ) |
|
| |
 |
|
Product should be used only in well ventilated areas in order to keep the vapor concentration low. Eye contact and repeated skin contact should be avoided. Normal protective clothing such as gloves and goggles are recommended. A self-contained breathing apparatus should be worn in confined spaces where there is little ventilation and vapors are likely to be high.
Ammonium persulfate and its solution does not present any serious health hazards. However, persulfate allergy is not uncommon as a skin rash which disappears when further contact is avoided. Wearing rubber gloves is suggested; prolonged contact of any persulfate with the skin should be avoided. After contact, water should be used to cleanse the skin.
|
|
| |
 |
|
Immediately flush eyes with water for 15 minutes. Get immediate medical attention.
Wash affected area with soap and water. Remove contaminated clothing.
Remove to fresh air. If breathing is difficult, get medical attention.
Drink 2 glasses of water. Call a physician.
Never give anything by mouth to an unconscious or convulsing person.
|
|
| |
 |
|
The data, information and statements contained herein are believed to be reliable, but are not construed as a warranty or representation for which Avanti International assumes any legal responsibility. Since field conditions vary widely, users must undertake sufficient verification and testing to determine the suitability of any product or process mentioned in this or any other written material from Avanti for their own particular use. NO WARRANTY OF SUITABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS MADE. In no case shall Avanti International be liable for consequential, special, or indirect damages resulting from the use or handling of this product.
|
|
| |
| |
